Nonlinear LBO Crystal

polarizador alfa-bbo y calcita glan thompson

el polarizador glan thompson está hecho de dos prismas α-bbo o calcita unidos entre sí. Tiene una longitud de onda de 200nm a 2300nm. El polarizador α-bbo se puede usar de aproximadamente 200 nm a 1100 nm, y el polarizador de calcita se puede usar de 350 nm a 2300 nm. este tipo de polarizador tiene una relación de extinción más alta que el polarizador espaciado por aire. y tiene el ángulo de campo más amplio de cualquier diseño. por ejemplo, el polarizador α-bbo glan thompson tiene un campo angular mayor que 15 grados.

Consulta ahora
productos detalles
Ít: Glan Thompson polarizador
caracteristicas:
Cementado
Campo de ángulo de aceptación amplio
Adecuado para aplicaciones de baja potencia

Material:

α-BBO , Calcita

Rango de onda:

α-BBO: 200-1100nm, Calcita: 350-2300nm

Relación de extinción:

α-BBO: < 5 × 10 -6 , Calcita : < 5 × 10 -6

Calidad de la superficie:

10 月 20 日

Desviación del haz:

< 3 minutos de arco

Distorsión de onda

λ / 4 a 633nm

Umbral de daño:

> 200MW / cm 2

Revestimiento:

MgF de una sola capa 2

Poseedor:

Aluminio anodizado negro

α-BBO Glan Thompson polarizador

Par. No.

Rango de longitud de onda (nm)

Extinción
Proporción

Angular
Campo)

C.A. (φa) ± 0.1
(mm)

O.D. (φd) ± 0.1
(mm)

L ± 0.1
(mm)

PGM6006

200-2300nm
(Recubrimiento @ 1300nm)

< 5 × 10 -5

> 15 °

6.0

15.0

18.6

PGM6008

8.0

25.4

21.8

PGM6010

10.0

25.4

25.5

PGM6015

15.0

30.0

34.3

PGM6020

20.0

38.0

43.5

Calcita Glan Thompson Polarizador

Par. No.

Rango de longitud de onda (nm)

Extinción
Proporción

Angular
Campo)

C.A. (φa) ± 0.1
(mm)

O.D. (φd) ± 0.1
(mm)

L ± 0.1
(mm)

PGM7106

350-2300nm
(Recubrimiento @ 1300nm)

< 5 × 10 -6

14-16 °

6.0

15.0

23.0

PGM7108

8.0

25.4

28.0

PGM7110

10.0

25.4

33.0

PGM7115

15.0

30.0

45.5

PGM7206

350-2300nm
(Recubrimiento @ 1300nm)

< 5 × 10 -6

25-28 °

6.0

15.0

26.0

PGM7208

8.0

25.4

32.0

PGM7210

10.0

25.4

38.0

PGM7215

15.0

30.0

53.0

Pedido basado en los requisitos del cliente, incluido el producto y el titular no estándar.



Aplicaciones relacionadas
glan taylor polarizer polarizador alfa-bbo y calcita glan taylor polarizador
polarizador alfa-bbo y calcita glan taylor polarizador
glan taylor polarizer está hecho de dos prismas de material de birrefringencia separados por un espacio aéreo. El polarizador con ventana de escape lateral es adecuado para aplicaciones de potencia baja a media. el polarizador glan taylor dividirá un haz no polarizado entrante en rayos de haz, uno es lo extraordinario que se transmite a través del otro lado, y otro es el rayo ordinario que se absorbe internamente y se refleja totalmente.
Lee mas
polarizador de láser glan para láser de alta potencia láser glan polarizador
para láser de alta potencia láser glan polarizador
glan laser polarizer está diseñado específicamente para láser de alta energía. está hecho de dos prismas de material de birrefringencia que se ensamblan con un espacio aéreo. el polarizador con dos ventanas de escape permite que el rayo rechazado salga del polarizador, lo que lo hace adecuado para el láser de alta potencia.
Lee mas
polarizador wollaston polarizador wollaston óptico de alto rendimiento
polarizador wollaston óptico de alto rendimiento
El polarizador wollaston está hecho de prismas de material de birrefringencia que se cementan entre sí. el rayo ordinario en la primera mitad del prisma se convierte en el rayo extraordinario en la segunda mitad. El divisor de haz polarizador wollaston tiene aproximadamente el doble de desviación para el polarizador rochon.
Lee mas
polarizador de rochon polarizador óptico alfa-bbo y yvo4 de rochon
polarizador óptico alfa-bbo y yvo4 de rochon
El polarizador de Rochón es el polarizador más antiguo, que se compone de dos prismas de material de birrefringencia que se cementan entre sí. este tipo de polarizador separa el haz incidente en un rayo ordinario y un rayo extraordinario como el polarizador wollaston, pero el rayo extraordinario se transmite directamente, mientras que el ordinario se transmite con un ángulo de desviación.
Lee mas
Waveplate
Waveplate
Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence. The velocities of the extraordinary and ordinary rays through the birefringent materials vary inversely with their refractive indices. The difference in velocities gives rise to a phase difference when the two beams recombine. In the case of an incident linearly polarized beam this is given by a=2pi*d(ne-no)/l (a-phase difference; d-thickness of waveplate; ne,no-refractive indices of extraordinary and ordinary rays respectively; l-wavelength). At any specific wavelength the phase difference is governed by the thickness of the retarder. Transmission range:330nm-2100nm Thermal Expansion Coefficient:7.5x10-6/K .Density:2.51g/cm3  Half Waveplate The thickness of a half waveplate is such that the phase difference is l/2-wavelength (true-zero order) or some multiple of l/2-wavelength (multiple order).  A linearly polarized beam incident on a half waveplate emerges as a linearly polarized beam but rotates such that its angle to the optical axis is twice that of the incident beam. Therefore, half waveplates can be used as continuously adjustable polarization rotators. Half waveplates are used in rotating the plane of polarization, electro-optic modulation and as a variable ratio beamsplitter when used in conjunction with a polarization cube. Quarter Waveplate The thickness of the quarter waveplate is such that the phase difference is l/4 wavelength (true-zero order) or some multiple of l/4 wavelength (multiple order). If the angle q (between the electric field vector of the incident linearly polarized beam and the retarder principal plane) of the quarter waveplate is 45, the emergent beam is circularly polarized. When a quarter waveplate is double passed, i.e. by mirror reflection, it acts as a half waveplate and rotates the plane of polarization to a certain angle. Quarter waveplates are used in creating circular polarization from linear or linear polarization from circular, ellipsometry, optical pumping, suppressing unwanted reflection and optical isolation. Optically Contacted Zero-Order Waveplate   • Optically Contacted • Thickness 1.5~2mm • Double Retardation Plates • Broad Spectral Bandwidth • Wide Temp. bandwidth Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/300 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Cemented Zero-Order Waveplate Cemented by Epoxy Better Temperature Bandwidth Wide Wavelength Bandwidth AR Coated, R<0.2% Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 266nm, 355nm, 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Air Spaced Zero-Order Waveplate Double Retardation Plates AR Coated,R<0.2% and Mounted High Damage Threshold Better Temperature Bandwidth Wide Wavelength Bandwidth Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/300 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 266nm, 355nm, 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Single Plate Ture Zero-order Waveplate 1.Broad Spectral Bandwidth 2.Wide Temperature .Bandwidth 3.Wide Angle Bandwidth 4.High Damage Threshold Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 1310nm, 1550nm   Cemented Ture Zero-Order Waveplate Cemented by Epoxy Wide Angle Acceptance Better Temperature Bandwidth Wide Wavelength Bandwidth   Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Cemented Achromatic: Achromatic waveplate is similar to Zero-order waveplate except that the two plates are made from different materials, such as crystal quartz and magnesium fluoride. Since the dispersion of the birefringence can be different for the two materials, it is possible to specify the retardation values at a wavelength range. Material: Optical grade Crystal Quartz and MgF2 Dimension Tolerance: +0.0, -0.2mm Wavefront Distortion: < l/ 8@633nm Retardation Tolerance: <l/ 100 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavele...
Lee mas
Beamsplitter
Beamsplitter
Beamsplitters are optical components used to split input light into two separate parts,mainly include cube polarization beamsplitter, plate polarization beamsplitter and cube non-polarization beamsplitter.
Lee mas
espejos de silicona de crecimiento fz Reflectores infrarrojos y material de ventanas de silicio (si).
Reflectores infrarrojos y material de ventanas de silicio (si).
el silicio (si) se cultiva mediante técnicas de extracción de czochralski (cz) y contiene algo de oxígeno que causa una banda de absorción de 9 micrones. para evitar esto, el material puede prepararse mediante un proceso de zona flotante (fz).
Lee mas
cristal ktp Cristal ktp no lineal (potasio fosfato de titanio - ktiopo4)
Cristal ktp no lineal (potasio fosfato de titanio - ktiopo4)
El cristal ktp no lineal llamado potasio fosfato de titanilo (ktiopo4 o ktp) se usa ampliamente en láseres comerciales y militares, incluidos los sistemas de laboratorio y médicos, los buscadores de rango, lidar, comunicación óptica y sistemas industriales.
Lee mas
Waveplate
Waveplate
Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence. The velocities of the extraordinary and ordinary rays through the birefringent materials vary inversely with their refractive indices. The difference in velocities gives rise to a phase difference when the two beams recombine. In the case of an incident linearly polarized beam this is given by a=2pi*d(ne-no)/l (a-phase difference; d-thickness of waveplate; ne,no-refractive indices of extraordinary and ordinary rays respectively; l-wavelength). At any specific wavelength the phase difference is governed by the thickness of the retarder. Transmission range:330nm-2100nm Thermal Expansion Coefficient:7.5x10-6/K .Density:2.51g/cm3  Half Waveplate The thickness of a half waveplate is such that the phase difference is l/2-wavelength (true-zero order) or some multiple of l/2-wavelength (multiple order).  A linearly polarized beam incident on a half waveplate emerges as a linearly polarized beam but rotates such that its angle to the optical axis is twice that of the incident beam. Therefore, half waveplates can be used as continuously adjustable polarization rotators. Half waveplates are used in rotating the plane of polarization, electro-optic modulation and as a variable ratio beamsplitter when used in conjunction with a polarization cube. Quarter Waveplate The thickness of the quarter waveplate is such that the phase difference is l/4 wavelength (true-zero order) or some multiple of l/4 wavelength (multiple order). If the angle q (between the electric field vector of the incident linearly polarized beam and the retarder principal plane) of the quarter waveplate is 45, the emergent beam is circularly polarized. When a quarter waveplate is double passed, i.e. by mirror reflection, it acts as a half waveplate and rotates the plane of polarization to a certain angle. Quarter waveplates are used in creating circular polarization from linear or linear polarization from circular, ellipsometry, optical pumping, suppressing unwanted reflection and optical isolation. Optically Contacted Zero-Order Waveplate   • Optically Contacted • Thickness 1.5~2mm • Double Retardation Plates • Broad Spectral Bandwidth • Wide Temp. bandwidth Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/300 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Cemented Zero-Order Waveplate Cemented by Epoxy Better Temperature Bandwidth Wide Wavelength Bandwidth AR Coated, R<0.2% Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 266nm, 355nm, 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Air Spaced Zero-Order Waveplate Double Retardation Plates AR Coated,R<0.2% and Mounted High Damage Threshold Better Temperature Bandwidth Wide Wavelength Bandwidth Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/300 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 266nm, 355nm, 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Single Plate Ture Zero-order Waveplate 1.Broad Spectral Bandwidth 2.Wide Temperature .Bandwidth 3.Wide Angle Bandwidth 4.High Damage Threshold Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 1310nm, 1550nm   Cemented Ture Zero-Order Waveplate Cemented by Epoxy Wide Angle Acceptance Better Temperature Bandwidth Wide Wavelength Bandwidth   Specifications: Material: Optical grade Crystal Quartz Dimension Tolerance: +0.0,-0.2mm Wavefront Distortion: <l/8@633nm Retardation Tolerance: <l/500 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavelength Standard wavelength: 532nm, 632.8nm, 800nm, 850nm, 980nm, 1064nm, 1310nm, 1550nm Cemented Achromatic: Achromatic waveplate is similar to Zero-order waveplate except that the two plates are made from different materials, such as crystal quartz and magnesium fluoride. Since the dispersion of the birefringence can be different for the two materials, it is possible to specify the retardation values at a wavelength range. Material: Optical grade Crystal Quartz and MgF2 Dimension Tolerance: +0.0, -0.2mm Wavefront Distortion: < l/ 8@633nm Retardation Tolerance: <l/ 100 Surface Quality: 20/10 Scratch and Dig AR Coating: R<0.2% at center wavele...
Lee mas
prismas penta prismas de penta recubiertos de aluminio
prismas de penta recubiertos de aluminio
El prisma penta es un prisma de cinco lados que contiene dos superficies reflectantes a 45 ° entre sí, y dos caras refractantes perpendiculares a las vigas que entran y emergen. Las superficies reflectantes de prisma penta estándar están recubiertas con aluminio o aluminio mejorado.
Lee mas
lentes cilíndricas sf10 Lentes cilíndricas plano-convexas.
Lentes cilíndricas plano-convexas.
Las lentes cilíndricas se utilizan principalmente para cambiar el tamaño de la imagen según los requisitos de diseño. & nbsp; plano Las lentes cilíndricas convexas se utilizan para enfocar la luz en una línea delgada en aplicaciones como escáneres láser, espectroscopía, láser de tinte, ópticas acústicas, procesadores ópticos, etc. .
Lee mas
frecuencia de duplicación de linbo3 de cristal cristal fotónico linbo3 de duplicación de frecuencia
cristal fotónico linbo3 de duplicación de frecuencia
Los cristales de linbo3 son el material más utilizado para células de pockel, q-switches y moduladores de fase, sustratos de guía de onda, obleas de onda acústica de superficie (saw), etc.
Lee mas
enviar un mensaje
Si tiene preguntas o sugerencias, por favor déjenos un mensaje, le responderemos tan pronto como podamos.
Get In Touch
  • Tel : +86-591-22857792
  • Email : sales@100optics.com
  • Añadir : 3th Floor, Building 1, No 39 Jinlin Road, Cangshan District, Fuzhou Fujian,P.R.China.
Deja un mensaje Bienvenidos a Hundreds Optics
Si tiene preguntas o sugerencias, por favor déjenos un mensaje, le responderemos tan pronto como podamos.

Casa

Productos

Noticias

contacto